ATN PS28-3

$ 3,701.00

SHIPPING INCLUDED. This item is drop shipped from ATN. Allow 14 days for delivery.

 If you find a lower price then e-mail me at or call me at 1-231-796-8458.

This is the third generation,  version of the PS28 Rifle Site.

It has a resolution of 64 lines per millimeter.

It is a night only site and comes with a near IR illuminator.

It must be mounted in front of your day scope. It will not work with a day scope which has a front focal lens.

The center of the tube is 1.5 inches above the rail. There fore you may need risers to raise this sight or to raise your day scope so that the center of the day scope's tube and the center of the PS28's tube are within 3mm of each other.

The site does not have a reticle. It is guaranteed to change your weapon's POA ( point of impact ) no more than 1.0 MOA ( minute of angle ).

ATN's 3rd generation.

By adding a sensitive chemical, gallium arsenide to the photocathode a brighter and sharper image has been achieved over 2nd generation units. An ion barrier film was also added to increase tube life. 3rd Gen. provides the user with good to excellent low light performance.

ATN's 3rd generation image intensifier tubes are of the highest quality. They have a micro channel plate, GaAs photocathode, and a completely self-contained integral high-voltage power supply. These 3rd Generation tubes provide a combined increase in resolution, signal to noise and photosensitivity over tubes with a multi-alkali photocathode. Generation 3 is the standard for the USA military.


  • Easily changes your daytime scope to a starlight night vision scope.
  • Mounts in front of your daytime scope, no re-zeroing required.
  • 1x magnification.
  • Fast manual front focal lens focus.
  • Resistance to all severe operating conditions.
  • Lightweight and rugged.
  • Comes with quick release picatinny mount.
  • Automatic Brightness Control System always keeps the IIT
    brightness level constant, even under unsteady brightness


Total Darkness IR System Yes
IIT Generation 3
Resolution 64 lp/mm
Signal to Noise Ratio 22 Typical
Figure of Merit 1600 Typical
MTTF - Mean Time Before Failure 10,000 hours
Magnification 1x
Diopter Adjustment No
Controls Direct
Automatic Brightness Control Yes
Bright Light Cut-off Yes
Infrared Illuminator Detachable
IR Indicator No
Low Battery Indicator No
Power Supply 1 x 3V(CR123A)
Battery Life 50 hrs
Environmental Rating Waterproof
Operating Temperature -40°F to +122°F
-40°C to +50°C
Storage Temperature -58°F to +158°F
-50 to +70 °C
Dimensions 7.7”x 3.5”x3”
195x 89 x 76mm
Weight 1.85 lbs/ 0.84 kg
Warranty 2 years


Included Accessories.

  • Remote control unit.
  • Near IR light with picatinny mount.
  • Mil-spec hard case.
  • Warranty card.
  • One lithium battery.
  • Lens tissue.
  • Instruction manual.